Mottavik

Guide

How to run parts inventory at a salvage yard

Parts inventory at a salvage yard rests on four habits: a unique number on every part, an exact shelf address, photos, and regular stocktakes.

This guide is for yard owners and warehouse staff. The steps are the same for a large auto dismantler and a small yard with a few racks, on paper, in Excel or in software. Each section ends with how Mottavik handles that step.

A number and a label on every part

Inventory starts the moment a part comes off the car. It needs its own number right away: one number for one physical part. Not the manufacturer's part number and not the donor car's VIN, but your own internal code. Two identical alternators from two cars are two parts with two different numbers.

What goes on the label

  • Your internal number and a barcode of it.
  • A short name: “Alternator”, “Left headlight”.
  • Make, model and year of the donor car.
  • The manufacturer's part number, if it is readable on the part.

Print the label on a thermal printer instead of writing it with a marker. Handwritten digits get misread, and a scanner reads a barcode in a second. Stick the label on the housing, where washing will not rub it off and fitting will not tear it. Not on a hose, a wire or a greasy surface.

How Mottavik does it

Every part gets a code made of the letter B and seven digits, for example B0004127. Labels print on a thermal printer that speaks TSPL, ZPL or ESC/POS, or through the system driver. Label size, print density and font are set to match the printer. The system tells its own label apart from a manufacturer's sticker, so the scanner will not mix them up.

Shelf addresses: zone, row, section, shelf

A part without an address takes half an hour to find. An address is the path to a shelf, written as a short code. The most practical scheme has four levels.

Four address levels, using A-03-2-4 as the example
LevelCodeWhat it means
ZoneAAn area of the warehouse: body parts, engines, electrical.
Row03A row of racks inside the zone.
Section2A rack section between two uprights.
Shelf4A level in the section, counted from the bottom.

Put together, the address reads A-03-2-4: zone A, row 3, section 2, shelf 4. Staff read it like a street address and walk straight to the spot. A new hire can find parts on day one.

Rules that keep it tidy

  • One address, one shelf. Do not split a shelf into “left” and “right” without separate codes.
  • Every shelf has its own barcode label.
  • Heavy parts on low shelves, small parts on high ones.
  • Keep a separate intake area for parts with no place yet, and clear it every day.

How Mottavik does it

An address has five levels: warehouse, zone, row, section, shelf. The rack generator builds a rack in one run, up to 200 sections and 2,000 shelves, and prints labels for every shelf. Placing parts takes two steps: scan the shelf, then scan the parts. Parts with no address collect in a separate queue. If a part is listed in another warehouse, the system warns you.

Photos: what to shoot

A photo sells the part when the buyer is far away. It also protects you in an argument about condition. Take photos right after removal, before the part goes on the shelf.

  1. The whole part, on a plain light background.
  2. The manufacturer's part number up close, with every digit readable.
  3. Each defect on its own: a crack, a chip, a broken mount.
  4. Your label, so the photo is never mixed up with another part.

Three to five photos are enough for most parts. Shoot body panels from both sides. A photo without the manufacturer's number does little for a buyer who searches by number.

How Mottavik does it

Photos are added from a phone, up to 20 MB each, including iPhone HEIC. Photos can be reordered and rotated. Fields that repeat, such as the donor car, can be pinned: they carry over to the next part, so nobody types them again.

Stocktakes: how often and how to count

Even good records drift away from the shelf over time. A part was sold and not written off, put on the wrong shelf, or lent to a customer to try. A stocktake finds these gaps while there are still few of them.

Count one zone at a time

Do not shut the whole yard down for a count day. Count one zone at a time, for example one zone a week. In a few weeks you cover the whole warehouse, and work never stops. Check expensive parts and the intake area more often.

What to do with the results
ResultWhat it meansWhat to do
MissingThe part is on record, but nobody found it on the shelf.Check the nearby shelves and the last few days of sales. Still not found: write it off with a reason.
SurplusThe part was found here, but on record it sits in another warehouse.Move it on record to where it actually is.
Repeat scanThe same part was scanned twice.Nothing. One part is one line, even after two scans.

How Mottavik does it

You run a stocktake with a phone or a scanner. A repeat scan is not counted twice. A part from another warehouse goes to surplus, and anything not scanned goes to missing. At the end you get a report: scanned, missing, surplus. In the app, stocktake scans are saved without internet and sent when the connection returns.

Who sold what

When a part goes missing, the first question is who sold it and for how much. If sales go into a notebook, there is no answer. The rule is simple: every sale goes through the system, under the name of the person who made it.

  • Every employee has their own login, not one shared password.
  • Put a part on hold for a customer so it is not sold twice.
  • Record a return as a return, not as new stock.
  • Write off damaged and lost parts with a reason instead of deleting them.

How Mottavik does it

A sale is a deal: hold, completion, partial or full return, write-off. The audit log shows who changed what and when. Roles have access levels from None to Full, so only the people who need it see purchase prices.

Common mistakes

These mistakes are what make records stop matching the shelf. Each one is easy to spot and fix.

  • The part is “somewhere in row three”. Finding it takes longer than selling it.
  • Handwritten numbers. They cannot be scanned, and a 1 is easy to read as a 7.
  • Parts are entered a week after removal. By then a part may already have been sold off the books.
  • One login for everyone. The log has no name in it, and nobody can explain a mistake.
  • A stocktake once a year. A year of gaps piles up, and nobody can explain them anymore.
  • Parts without photos. A buyer asks, and someone has to walk to the warehouse to take a picture.

Questions

Can I run this kind of inventory in Excel?

Yes, while you have a few hundred parts and one person keeps the sheet. It gets harder once parts are scanned with a phone, several people work in the file, and you need to know who changed or sold what.

What if parts are already on the shelves without numbers?

Start with one zone. Label the shelves, then walk the zone: describe each part, stick on a number and scan it onto its shelf. From day one, handle every new part by the new rules. If your parts are already in a spreadsheet, the Mottavik team moves the data for you.

How often should I run a stocktake?

In parts, for example one zone a week. That way every shelf gets checked regularly and the yard never stops. After a big move of parts, recount that zone right away.

Want to see this in your yard?

We will show you on a demo how it works with your own data.

Request access